|
Duracell myGrid Connecting Devices
 |
myGrid
is easy to use!
To
start charging, you must first install a Power Clip™ or Power
Sleeve™
to your compatible
device. Then, simply drop your device on myGrid to
charge.
|
Installing and using the Power Clip
 |
Step 1
Insert the proper tip into the device's charging port. Press the tip
into the charging port and ensure a proper fit.
Step 2
Place the Power Clip on the tip and make sure the two are sealed
together properly, then swivel the Power Clip over the center of the
phone and press firmly into place (remove the adhesive backing on the
Power Clip prior to installation).
Step 3
Place the device on myGrid, making sure that it rests fully on the pad.
The blue indicator light will appear on myGrid when the device is being
charged properly.
|
Installing and using the Power Sleeve
 |
Step 1
Carefully insert your device into the Power Sleeve.
Step 2
Use your fingers to stretch the Power Sleeve over the top of the device.
Step 3
Place the device on myGrid, making sure that it rests fully on the pad.
The blue indicator light will appear on myGrid when the device is being
charged properly. |
|
|
